Fill and Fix Expanding Foam is a quick setting one part polyurethane foam in aerosol form. The Fill and Fix version is supplied with attachable nozzles and Gun Grade is supplied for use with our range of applicator guns. The foam expands on application to up to 50 times its original volume and expands on application by 150%. Once cured, the foam can be cut, sawn or plastered over after only an hour providing the working temperatures (can and surfaces) are between +5 to +25° C, ideally 20° C.
BENEFITS
- Quick setting - can be cut, sawn or plastered in 1 hour
- Economical in use - expands up to 50 times its original volume
- Fills irregular and broad gaps where most conventional fillers would fail
- Possesses insulating and sound deadening properties.
AREAS OF USE
Filling
- gaps around pipe entries through walls
- gaps around window and door frames
- electrical wire chasing prior to plastering
- deep joints prior to applying sealant or plaster
- irregular gaps in stone, brick, concrete or plaster
Fixing
- door frames
- timber structures
- window sills and thresholds
- Window frames
Insulating
- behind cladding to exterior walls
- behind sofit and barge boards
- in automotive applications
Size - 500ml
COSHH Datasheet: Download 0619
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H317 May cause an allergic skin reaction.
H351 Suspected of causing cancer <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H362 May cause harm to breast-fed children.
H335 May cause respiratory irritation.
H373 May cause damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H412 Harmful to aquatic life with long lasting effects.
H413 May cause long lasting harmful effects to aquatic life.
P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe dust/fume/gas/mist/vapours/ spray.
P263 Avoid contact during pregnancy and while nursing.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P284 [In case of inadequate ventilation] wear respiratory protection.
P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.
GHS02 Flammable
GHS08 Serious health hazard
GHS07 Health hazard/Hazardous to the ozone layer