This EVERBUILD Wet Rot Wood Hardener is a highly penetrative solution of selected resins in solvent which soaks deep into the fibres of decaying wood, and dries to leave the wood hard and resistant to further moisture penetration.
The resin-modified wood then becomes an ideal base for repair with EVERBUILD 2 PART HIGH PERFORMANCE WOOD FILLER. The solution is dry in 6 hours, and is suitable for interior and exterior use providing a cost-effective alternative to replacing joinery affected by wet rot.
The Hardener binds together damaged wood to form a solid base for filling, and will reduce subsequent water penetration.
Specifications:
Size: 250 ml.
Drying Time: 6 Hours.
Flash Point: -17°C.
COSHH Datasheet: Download 1047
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P370 + P378 In case of fire: Use… to extinguish.
P501 Dispose of contents/container to …
GHS02 Flammable
GHS07 Health hazard/Hazardous to the ozone layer