J-B Weld HighHeat™ Epoxy Putty is specifically formulated to bond and repair materials exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage.
This industrial-strength product outperforms conventional epoxy putties at high temperatures, and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted.
Offers exceptionally high strength in continuous 232°C (450°F) and up to 260°C (500°F) intermittent. Resistant to water, chemicals and heat.
Specifications:
Bonding Strength: 800 PSI (600 PSI at 400°F).
Temperature Resistant: up to 232°C (450°F) or 260°C (500°F).
Set Time: 1 Hour.
Cure Time: 8 Hours.
Colour When Dry: Machine Grey.
Size: 57g.
COSHH Datasheet: Download 5196
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P310 Immediately call a POISON CENTER/doctor/ …
P302 + P352 IF ON SKIN: Wash with plenty of water/…
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents/container to …