MoTip Pro PTFE Dry Spray treats mechanical parts of metal and plastic, where no residues of oil or grease are desired. PTFE Dry prevents wear and sticking. It has a very low friction factor, an excellent adhesion and is resistant to weather influences. It leaves no residues of oil or grease (dry film).
Suitable for parts which are liable to light load and low speed. It can also be used as a release agent for moulds, where the use of silicone is not desired.
COSHH Datasheet: Download 3237
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
EUH066 Repeated exposure may cause skin dryness or cracking
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe dust/fume/gas/mist/vapours/ spray.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.
P501 Dispose of contents/container to …
GHS02 Flammable
GHS07 Health hazard/Hazardous to the ozone layer
GHS09 Hazardous to the environment