Paslode IM65a Angle Brads have an electro galvanised finish which meets Eurocode 5 requirements for all applications in service class 1 (indoor). Specification: Zn and chromate minimum 7µm. The stronger, stiffer 16 gauge nail ensures consistent drivability. 16 gauge size creates smaller hole to provide excellent finishing. Secured with specific glue, designed not to fracture into pieces if accidentally dropped.
Suitable for use with the Paslode Impulse IM65A F16 Angled Nailer.
All Paslode nails are CE Marked which guarantees compliance to European regulations.
These Paslode IM65a Brads have the following specification:
Finish: Galvanised
Size: 38mm
Diameter: 1.6mm
Pack: Box of 2,000
Number of Fuel Cells: 2
COSHH Datasheet: Download 2184
H229 Pressurised container: May burst if heated.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.